SURFBOARD STUDIO

SURFBOARD STUDIO
block
block
Min: $0 Max: $350

FCSII Fin Plug Original

The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing

$12.00

FCSII Fin Plug Acid

The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing

$12.00

FUTURES Fin Plugs - Yellow

FUTURES FIN PLUGS - YELLOW

$12.00

FCS Leash Plug 25mm

1" diameter x 1/2" high Surfboard Leash Plug. Stainless steel leash loop pin. Available in White, Blue, Red, and Yellow. Can be installed before laminating (pre-glass) or after hotcoating (post-glass) and features a cap to prevent resin from getting

$2.00

FCSII Fin Plug Reef Blue

The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing

$12.00

SIA Speed Disk Velcro 200mm

The SIA Speed range is a perfect abrasive for sanding surfboard glass jobs. SIA's patent design reduces clogging making sanding faster and easier. The Speed range has an extended product life and can be used with either polyester or epoxy resins. Ideally

$2.50

FCSII Router Bit

FCSII Router Bit FCS router bit can be used with both FCS Fusion and FCS II Fin Jigs. Note: Router & Jigs are sold separately. Easy to use, simply install the bit into any hand held router, set the bit inside the fin jig and let the bearing run along the

$75.00

FCS II Dummy Fins Tri Set

Use these fin jigs while installing FCS II boxes to ensure proper cant. These "Dummy Fins" are molded to fit securely into the FCS II fin boxes during installation to set the proper cant and be removed easily after the resin cures. The Dummy Install F

$39.95

FCSII Fin Plug Red

The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing

$12.00

FCS II Fin Plug Black

The FCS II system has been designed to perform at the highest level by seamlessly connecting 3 essential elements in surfing

$12.00

Australian Fin Company - Fin Plug Pack (6)

Australian Fin Company - Fin Plug Pack Australian Fin Company fin plugs Pack of 6 plugs (4 Rails and 2 Centres) -Lightweight -Designed to fit FCS fins

$25.00

FUTURES One-Pass Cutter

One-pass Cutter Bit sizes 1/2" & 3/4"

$59.95

FUTURES Fin Plugs - White

FUTURES FIN PLUGS - WHITE

$12.00

Futures Dummy Thruster Set

Futures Set Fins are specifically designed to help set the proper fin angles when installing Futures ILT boxes. - Qty (2) 6.5 dg Left and Right Side 3/4 tang - Qty (1) 0 dg Center 1/2 tang - Made in USA

$40.00

FUTURES 2-Pass Fin Box Installation Kit

The 2-Pass Installation Kit is used when installing Futures Fins Boxes after lamination. Includes: - Router Slide With Faceplate installed - Jig Plate Router Guide - 1/2" insert for Jig Collar - Jig Plate - 1/4” One Pass Bit - Timmy Tool - EVA S

$270.00

LOYTAPE Heatproof Masking Tape Cream

High Temperature 150° rating 50 metres. Loy tape is one of the leading tapes you can trust for the ultimate in masking applications .

$2.95

FCSII Fin Plug Orange

FCS II Fin Plugs are sold individually for building boards or repair.

$12.00

Tint Cinnamon

Powder surfboard tint. UV stable, epoxy and polyester compatible tint powder. Designed to add colour to laminating coats or washed filler coat.

$20.00

FCS FUSION ROUTER BIT

FCS router bit can be used with both FCS Fusion and FCS II Fin Jigs. Note: Router & Jigs are sold separately. Easy to use, simply install the bit into any hand held router, set the bit inside the fin jig and let the bearing run along the inside.

$75.00

Flex Resin Clear 3LT

Surfset FLEX has been developed to be one of the most user friendly surfboard epoxy resins available. One of the main reasons it’s so popular is because it’s an easy 3-in-1 resin:-

$85.00

FLEXPAD 8 Inch Medium 14MM Sand Pad Velcro

The flex is between the soft and the hard Flexpad. Manufactured in 14mm female with Velcro hook face for use with hook & loop sandpaper discs.

$49.00

Futures Dummy Twin/Sidebite Set

Futures Set Fins are specifically designed to help set the proper fin angles when installing Futures ILT boxes. - Qty (2) 4 dg Left and Right 3/4 tang - Made in USA

$30.00

Longboard Thumb Screw / Plate

Use the thumb screw for tool less fin changes.

$10.00

SIA Speed Disk Velcro 150mm

The SIA Speed range is a perfect abrasive for sanding surfboard glass jobs. SIA's patent design reduces clogging making sanding faster and easier. The Speed range has an extended product life and can be used with either polyester or epoxy resins. Ideally

$1.95
Page 1 of 8